skip to Main Content

IMANSSON ELECTRIC MOTORS

Imansson electric motors (eP-series) are 100% current powered products. The motors have been developed to offer a simple but powerful solution and is a smart compromise suiting multiple applications. These electric motors are water cooled for steady endurance, the transmission with reduction gears provides optimum shaft speed and a high torque. This rotation force allows using propellers with a large diameter; these so called ‘high thrust’ propellers are very effective at towing or at sailing under heavy conditions. Since the electric motor enables torque during the whole rpm range, the possibility exists to manoeuvre at very low speeds. Rudder pressure will linger as long as the propeller revolves.

Imansson eP-motors are available in different versions; voltage and output may differ and so do the futures. The electric motors are available from 19kW until 42kW rated power.

simple but powerful solution

high consistency by liquid cooling

easy installation by adjustable motor supports

suitable for multiple applications

applicable with marine gearbox**

fit with heat exchanger or keel cooling unit

modifiable with Both Sides Outputs*

hull insulated by flexible motor mounts

custom shaft connection by Output Flange Variety***

* PTO function | Motor-Motor configuration (serial) // ** Drives with SAE-7 and 20-40 DP/Z=26 // *** Stub axle with key | Conical shaft with key | Flange

 

Besides the eP-series, Imansson also delivers battery packs and the Current Control Unit (CCU) which controls the installation’s battery pack. Our line of LiFePo4 batteries offer a solution to demanding applications.

ELECTRIC MOTOR SERIES

RATED POWER (kW)
MAX. POWER (kW)*
MAX. SPEED (N/min)
VOLTAGE
MAX. CURRENT
PROTECTION
CONNECTION FLANGE
COOLING

eP-19M

series 1132

19 kW
22 kW
3000 N/min
48V
432A
IP65 waterproof
SAE 7
water cooled

eP-20M

series 2160

20 kW
36 kW
1500 N/min
96V
256A
IP65 waterproof
Flange DN 150
water cooled

eP-30M

series 3200

30 kW
43 kW
1200 N/min
96V
380A
IP65 waterproof
Shaft ΓΈ 50
water cooled

eP-42M

series 4200

42 kW
50 kW
2000 N/min
96V
448A
IP65 waterproof
Double Flange DN 120
water cooled

eP-76M

series 7200

2x 38 kW
.. kW
1200 N/min
144V
500A
IP65 waterproof
Double Flange DN 120
water cooled
  • Operation mode S2 – 60min. Maximum power may only be used for a short period of time. This means that this power should only be used for braking or other direct actions.
SCOPE OF SUPPLY
  • Motor assembly
  • Governor module
  • Remote control
  • Instrument panel
  • Electrical pumps
OPTIES
  • Gearbox with reduction ratio
  • Keel cooling components
  • 48-12 VDC converter
  • Heat exchanger twin with raw water pump

IMANSSON APPLICATIONS

WORK BOAT

Imansson elektromotor, electric motor, electric marine motor, elektrisch varen, emissievrij varen, Palfinger boats, fast rescue palfinger, elektrische reddingsboot,

FAST RESCUE

Back To Top